Installing the best putting greens can be a difficult and time-consuming process, but it doesn’t have to be. With the right materials and know-how, you can successfully install your synthetic turf in no time. Here are eight steps that will ensure your synthetic lawn is installed perfectly from the start.
-
Measure the Area
Before you begin installing your turf, it’s important to measure the area that you plan to cover with turf. This will help you determine how much material you need for the project and make sure that everything fits properly when it comes time to lay down the turf.
-
Remove Existing Turf (if necessary)
If there is existing grass or other growth where you plan on installing your new synthetic turf, then it needs to be removed first. Use a shovel or spade to loosen up any roots and remove them completely before starting installation.
-
Level the Ground
Once all of the existing vegetation has been removed, use a rake or other tool to level out the surface of the ground so that there are no high spots or low spots for the best putting greens. This will ensure even distribution of material when laying down turf later on.
-
Install Weed Barrier Fabric
To prevent weeds from growing up through your newly installed synthetic grass, use weed barrier fabric underneath it as an extra layer of protection against pesky growths that may pop up later on down the line. Make sure that all seams are sealed with tape or staples for best results!
-
Lay Down Infill Material
Infill material is what gives the best artificial turf in San Jose its weight and helps create a realistic look and feel when walking on it. Spread this evenly across your entire lawn area and make sure that all areas are covered with some type of infill material for best results!
-
Install Turf Rolls
Now for the fun part—it’s time to lay down those rolls of turf! Place each roll carefully so that it lands in its intended spot without creating too many bumps or wrinkles along the way (this may take some trial and error). Make sure to overlap each row by at least 2 inches for added stability once everything is finished!
-
Secure Edges and Seams with Adhesive Glue
Once all of your turf rolls are in place, secure their edges and seams with adhesive glue around their perimeter so they don’t shift out of place over time due to wear or weather conditions outside. Allow ample drying time before using your new synthetic lawn!
-
Enjoy Your New Synthetic Lawn!
Congratulations—you’ve made it through all 8 steps! Now sit back, relax, and enjoy your new perfectly installed synthetic lawn as often as possible!
Installing the best artificial turf can be daunting at first glance but with these eight simple steps, you’ll have a perfectly installed artificial grass field in no time! By following these instructions closely and taking into account any hazards beforehand, you’ll have an enjoyable experience throughout every step of installation and end up with beautiful results in no time!
